ENG| CN
Contact LinkedIn Cubic
OEM Gas Bench
OEM Gas Bench
Home > Product > OEM Gas Bench

OEM Gas Bench

Cubic Instruments has several OEM gas bench based on different technologies like micro flow NDIR, dual beam NDIR, UV-DOAS and NDUV, which are best choice of gas analyzer integration because of the advantage of optical gas benches, such as fast response, accurate, stable and long lifetime. We are working continuously to develop the OEM gas bench to cover more gas and boarder measurement range with more technologies.

Product Recommendation Matrix

Products Model Technology Measurement Gas Measurement Range
Min Range Max Range Typical Range

Gasboard 2105

Learn More

Micro-flow NDIR SO2,NO,CO,CO2 0-200ppm 0-5% vol /
CH4 0-250ppm 0-100% vol /

Gasboard 2205

Learn More

UV DOAS SO2+NO 0-50mg/m3 / SO2,NO: 0-100mg/m3
SO2,NO: 0-200mg/m3
SO2,NO: 0-500mg/m3
SO2+NO+NO2 0-100mg/m3 / SO2:0-100ppm
NO: 0-100ppm
NO2: 0-200ppm

Gasboard 2300

Learn More

NDUV NO2 0-200ppm / 0-500ppm

Gasboard 2000

Learn More

Dual Beam NDIR CO2 0-500ppm 0-100% vol 0-25% vol


Browse All Products

OEM Gas Bench

  • GFC Infrared Gas Sensor BenchGasboard-2601
    Gasboard-2601
    GFC Infrared Gas Sensor Bench
    Gasboard-2601 gas filter correlation (GFC) infrared gas sensor is a high-performance gas analysis sensor independently developed by Cubic-ruiyi (a wholly-owned subsidiary of Cubic Sensor and Instrument Co.,Ltd). The gas sensor bench is based on the principle of non-dispersive infrared (NDIR) technology and adopts gas filter correlation (GFC) infrared absorption technology. By comparing the absorption degree of sample gas and reference gas, the concentration of measured gas is calculated according to the absorption relationship of Lambert-Beer law, and the detection error caused by gas interference is effectively eliminated through the reference gas chamber. The product adopts reliable and stable light source, high-performance detector and precision signal processing circuit, with high measurement accuracy, strong anti-interference ability and long-term stability. It is especially suitable for situations where gas concentration is low, absorption is weak and long-term monitoring is required. The product adopts
    More
  • TDLAS Gas Sensor ModuleGasboard-2520
    Gasboard-2520
    TDLAS Gas Sensor Module
    The Gasboard-2520 series is a high-performance gas analysis sensor module independently developed by Cubic Instruments (Wuhan)Ltd. It is based on tunable diode laser (TDL) absorption spectroscopy and uses high-performance probes and special process gas chamber. It has the characteristics of high precision, high sensitivity, strong anti-interference ability, long life and stable performance. The product adopts modular design and is easy to install. The product can be calibrated through the RS-232/485 communication interface. The constant temperature design effectively avoids the impact of temperature changes on the sensor and can work stably in harsh working conditions and complex gas environments.
    More
  • Dual Beam NDIR  Gas BenchGasboard-2005
    Gasboard-2005
    Dual Beam NDIR Gas Bench
    The Gasboard-2005 series NDIR gas bench is suitable for vehicle emission or exhaust gas measurement, which adopts the high-precision dual-beam non-dispersive infrared (NDIR) gas analysis technology with independent intellectual property rights, based on the characteristics of the specific wavelength absorption of gas molecules to measure the light absorption rate of each gas then detect the concentration. Cubic Instruments has many years of experience in OEM/ODM supporting of Fortune 500 companies, which can meet the different needs of customer system development.
    More
  • Micro Flow NDIR  Gas BenchGasboard-2105
    Gasboard-2105
    Micro Flow NDIR Gas Bench
    Gasboard 2105 Micro flow NDIR gas bench adopt independent intellectual property rights and international PCT patent (PCT/CN2018100767) dual‐chamber sensor technology. The gas chamber is composed of the measured gas chamber and the reference gas chamber. The Gasboard‐2100 serials uses a dual chamber structure and special filters to solve environmental temperature instability and aging of electronic components. With improved accuracy, stability and anti‐interference, it is suitable for low range vehicle exhaust emission detection and environmental monitoring.
    More
  • UV-DOAS Gas BenchGasboard-2205
    Gasboard-2205
    UV-DOAS Gas Bench
    Gasboard-2200 series UV-DOAS gas bench adopt high-precision ultraviolet differential absorption spectroscopy gas analysis technology. With flashing xenon lamp as light source, when the light is transmitted in the measured gas, the intensity of the differential absorption characteristic produced is different which is used to derive the gas concentration & gas type Using a unique algorithm, the long path is returned to the gas chamber multiple times to get high sensitivity & strong absorption signal, at the same time it support long service life and good stability. It can accurately measure the gas concentration of SO2, NO and NO2. The measurement range is less than 100mg/m3, which can completely fulfill the needs of the ultra-low emission monitoring market.
    More
  • NDUV Ultra-low NO2 Gas benchGasboard-2305
    Gasboard-2305
    NDUV Ultra-low NO2 Gas bench
    Gasboard-2305 adopts non-dispersive ultraviolet absorption (NDUV) technology and highly stable pulsed LED UV source. The UV beam is absorbed & attenuated when passes through the gas chamber. The measured gas concentration is calculated according to Lambert-Beer law. The UV absorption method gas sensor is newly launched by Cubic Instruments, which is different from the UV differential method, measure the NO2 concentration with high accuracy and strong anti-interference. It is suitable for environmental monitoring.
    More
  • NDIR Gas BenchGasboard-2000
    Gasboard-2000
    NDIR Gas Bench
    The Gasboard-2000 NDIR gas bench which is based on Dispersive Infra-Red (NDIR) sensing principle to measure CO, CO2, HC in exhaust gases from gasoline and petro engines. The Electrochemical O2 and NO sensors can be plug-in easily on Gasboard-2000. It complies with advanced international standards: OIML R99 Class 1, 0, 00 standards, and widely used by OEM integrators, automobile emission gas analyzer manufacturer due to its flexible integration, high quality and easy maintenance.
    More
  • Micro flow NDIR NO Gas BenchGasboard-2100
    Gasboard-2100
    Micro flow NDIR NO Gas Bench
    Gasboard-2100 micro flow NDIR NO gas bench adopts independent intellectual property rights and international PCT patent (PCT/CN2018100767) dual-chamber sensor technology. The gas chamber is composed of measured gas chamber and reference gas chambe, this design has great capacity to solve environmental temperature instability and electronic components aging issues. It is very suitable for low range vehicle exhaust emission gas NO measurement with high accuracy.
    More
  • UV-DOAS NOx Gas BenchGasboard-2200
    Gasboard-2200
    UV-DOAS NOx Gas Bench
    Gasboard-2200 UV-DOAS NOx gas bench adopts high-precision ultraviolet differential absorption spectroscopy gas analysis technology to measure NO & NO2 simultaneously. It’s widely used by gas analyzers and PEMS manufacturers due to its flexible integration, high quality and easy maintenance.
    More
  • NDUV NO2 Gas benchGasboard-2300
    Gasboard-2300
    NDUV NO2 Gas bench
    Gasboard-2300 NDUV NO2 gas bench adopts non-dispersive ultraviolet absorption (NDUV) technology and highly stable pulsed LED UV source to measure NO2 gas. It can measure the gas concentration of NO2 with high accuracy and strong anti-interference without NOx converter.
    More
Home > Product > OEM Gas Bench

OEM Gas Bench

Cubic Instruments has several OEM gas bench based on different technologies like micro flow NDIR, dual beam NDIR, UV-DOAS and NDUV, which are best choice of gas analyzer integration because of the advantage of optical gas benches, such as fast response, accurate, stable and long lifetime. We are working continuously to develop the OEM gas bench to cover more gas and boarder measurement range with more technologies.
Show More

Product Recommendation Matrix

Product Type0

Measurement Technique 0

NDUV 1
UV-DOAS 3
NDIR 3

Measurement Object 0

NO 5
SO₂ 2
H₂S 2
N₂O 1
CH₄ 4
CO₂ 5
CO 4
NO₂ 4

Fuel Type 0

Application 0

Process Gas 1
Automobile Exhaust Gas 5
Flue Gas 6
Get the Products

OEM Gas Bench

Load More

You can contact Cubic Instruments by telephone or email, or you can submit an online Request for Quotation Form.
For Sales: sales@gasanalyzer.com.cn
For Administration: info@gasanalyzer.com.cn

Send
This website uses cookies to improve your user experience. By using this site, you consent to the use of cookies. You can find more information in our Privacy Policy.