ENG| CN
Contact LinkedIn Cubic
Get a Quote
ENCN
Get a Quote
ENCN
2.jpg
Home > Product > Flue Gas Analyzer

Online Flue Gas Analyzer

Gasboard-3600UV
The high-temperature UV flue gas analyzer adopted ultraviolet differential (UV-DOAS) technology and combined with Hot & Wet sampling technology to achieve direct measurement of high-temperature raw flue gas. It can simultaneously measure the concentration of SO2, NO, NO2 (other gases can be extended on request) in the emission gas from stationary sources of air pollution. Compared with the traditional Cold & Dry method  analyzers, it requires no condensing equipment and can effectively avoid the condensation loss of SO2 and other sour gas substances, and reach the higher measurement accuracy. The raw flue gas can be analyzed through a simple flow path, so Gasboard-3600UV can effectively reduce the failure rate of the instrument and save maintenance cost.
Segment: Flue Gas Analyzer
Division: Flue Gas Analyzer
Show More
pd_ico1.png pd_ico1_h.png Product Inquiry pd_ico1.png pd_ico1_h.png Product Inquiry pd_ico2.png pd_ico2_h.png Send Email to Us

Features

  • Hot & Wet Method: Raw flue gas is directly analyzed inside the analyzer through heated sampling line, without any condensing loss of SO2 and other components.
  • Low Detection Limit: Long optical path with multiple refletion design, suitable for ultra-low level emission monitoring.
  • Optical Method: Direct measurement of NO and NO2, no NOx converter required.
  • Good Stability: Optical path without any mechanical moving parts, strong vibration resistance.
  • Easy Maintenance: measuring chamber can be cleaned, convenient for maintenance.
  • Long Service Life: Pulsed xenon lamp source, good stability, more than 5 years of service life.

Specifications

Sampling Method
 Hot & Wet
Gas & Range

NO：0~100 to 1000mg/m3

NO2：0~100 to 1000mg/m3

SO2：0~100 to 1000mg/m3

（Other range can be customized）

Principle
 UV-DOAS
Resolution
 0.01mg/m3
Linear Error
 ≤±1%F.S.
Repeatability
 ≤1%
Response Time
 ≤60sec @ T90
Zero Drift
 ≤2%F.S./24h；≤3%F.S./7d
Span Drift
 ≤2%F.S./24h；≤3%F.S./7d
Heated Chamber Temp.
 120~200℃（programable)
Output
 RS-232/RS-485, 4-20mA
Power Supply
 110V/220VAC, 50/60HZ

For more details, please feel free to contact our sales: sales@gasanalyzer.com.cn.

Related Product

Gasboard-3000Plus
Gasboard-3000Plus
Online Infrared Flue Gas Analyzer
Gasboard 3000Plus is designed with world-leading micro-flow infrared sensor, is able to measure continuously simultaneously concentration of CO,CO2,SO2,NO,especially for lower range measurement. It is an ideal solution for monitoring in fields of boiler, power plant, combustion efficiency monitoring for various industrial furnaces or refuse incinerator, process and security monitoring.
More
Gasboard-9050
Gasboard-9050
Continuous Emission Monitoring System (CEMS)
The continuous emission monitoring system is based on innovative micro-flow NDIR technology to measure the SO2, NO, CO, CO2 and O2 (ECD or paramagnetic) five gases at the same time. Eliminate the ambient’s temperature influence on measurement value and less interference of water vapor on SO2 and NO measurement. It has excellent prolonged stability and less cross interference.
More
Gasboard-9070
Gasboard-9070
High Temperature UV Flue Gas Monitoring System
High Temperature UV Flue Gas Monitoring System Gasboard-9070 is based on advanced UV-DOAS gas analysis technology, which can simultaneously measure the concentration of SO2, NO, NH3 and other gases. It adopts multiple reflection chamber to reach a lower limit of detection. The system adopts high temperature tracing on whole sampling circuit to ensure high measurement accuracy, that can be widely used to monitor the flue gas from industrial stacks or stationary pollution source before and after desulfurization and denitrification, and accurately reflect the conditions of ammonia escaping.
More
GasTDL-3000
GasTDL-3000
Tunable Diode Laser (TDL) Gas Analyzer
TDL-3000 is an extractive gas analyzer adopts TDLAS (Tunable Diode Laser Absorption Spectroscopy) technology. With high-temperature heating trace technology to avoid water condensation and sour gas loss, the extrative-type analyzer can be used to accurately reflect the concentration of sour gases like NH3, HCL or HF in real time, and also provide reliable data support for flue gas cleanning system control and environmental monitoring.
More
CONTACT SALES

You can contact Cubic Instruments by telephone or email, or you can submit an online Request for Quotation Form.
For Sales: sales@gasanalyzer.com.cn
For Administration: info@gasanalyzer.com.cn

Send
This website uses cookies to improve your user experience. By using this site, you consent to the use of cookies. You can find more information in our Privacy Policy.