Home > Product > Automotive Exhaust Gas Analyzer

LSF 4.2 Switch Type Oxygen Sensor

LSF 4.2

Cubic switch type oxygen sensor ST is also called as four-wire oxygen sensor, it is a planar 2-state λ=1 sensor of ZrO2 (Nernst-principle) with an integrated heater. The sensor contains 4 wires, in which two wires are for heaters, the other two wires are for transmitting voltage signals.

Product Inquiry

Send Email to Us

Features

Independent R&D and production of chips
Short light-off time
Low heating power
Less dependent on exhaust temperature (conducive to the stability in different operating situations)
Double protection on the top of tube to confront impact
Good aging resistance
Anti-coating and anti-poisoning
Compact structure (high anti-vibration level)
Longer duration
Independent R&D and production for ceramic/zirconia oxide ZrO2 chips
Covering multiple series of car models.
Strong ODM/OEM capacity, cover multiple series of car models

Specifications

Heater resistance	9±1.5Ω
Operating voltage	12V
Maximum heating current	1.0A
Accuracy	λ=0.93-0.97 ( 350° ): 800±55mv; λ=1.05-1.10 ( 350° ): 50±30mv;
Response time	600mV-300mV:<125ms 300mv-600mv:<60ms;
Operating temperature / Exhaust gas temperature	150~930°C
Storage Temperature	-40°C~+90°C
Light-off time	<15S

For more details, please feel free to contact our sales: sales@gasanalyzer.com.cn.

Related Product

NOx Sensor: Diesel Nitrogen Oxide（NOx）Sensor; The nitrogen oxygen sensor for diesel nox emission monitor detects the NOx concentration in the exhaust gas of the diesel engine, converts it into an electrical signal and transmits it to the SCR system, determines the amount of fuel injection and the amount of urea required to treat the NOx in the exhaust gas, and purifies the exhaust gas to meet the emission standard.

LSF XFOUR: LSF XFOUR Oxygen Sensor; Cubic manufacturers automotive LSF XFOUR Oxygen Sensor. Independent R&D and production for ceramic/zirconia oxide ZrO2 chips.Help reduce emission pollution for environmental protection.

LSU 4.2: Wide Band Oxygen Sensor-LSU 4.2; Cubic could offer affordable O2 sensors LSU4.2. Fully sealed and waterproof design IP67. Equipped with advanced ceramic technology for high-temperature working conditions. A critical component of a car's exhaust system

LSU 4.9: Wide Band Oxygen Sensor-LSU 4.9; High Accuracy Air-fuel sensors offered by Cubic. high stability and fast response time. Equipped with advanced ceramic technology for high-temperature working conditions.

LSU ADV: Wide Band Oxygen Sensor -LSU ADV; The LSU ADV universal automotive oxygen sensor for exhaust gas easures the oxygen content in the exhaust gas. Faster light-off time,more sensitive sensing performance, good reliability, and longer service life

You can contact Cubic Instruments by telephone or email, or you can submit an online Request for Quotation Form.
For Sales: sales@gasanalyzer.com.cn
For Administration: info@gasanalyzer.com.cn

I accept to receive marketing emails from Cubic Instruments, and reserve the right to unsubscribe.

Send

Automotive Exhaust Gas Analyzer

Flue Gas Analyzer

Process Gas Analyzer

Gas Flowmeter

OEM Gas Bench